Showing 1–20 of 666 results

  • Accado Style Latch Deadbolt 4 Roller Multipoint Door Lock

    Accado Style Latch Deadbolt 4 Roller Multipoint Door Lock

    0 out of 5

    This Accado Style multipoint door lock features 4 Rollers, 1 Deadbolt & 1 Latch.

    Accado Style multipoint door locks are made by Turkish manufacturer, Accado. They were imported into the UK and fitted onto PVCu doors sold by B&Q, although it has been some time since B&Q have sold doors with these locks fitted.

    While this lock is relatively obscure, there are many doors with this lock in use. It’s relatively easy to identify by its 85mm PZ (centres) measurement and 4 roller configuration. It also features a latch reversal instruction sticker on the side of the lock case and some variations have Accado stamped on the faceplate.

    Multipoint locks with 85mm PZ are rare in the UK but are common in Europe and the rest of the world. The 4 roller configuration of this lock makes it a useful product to replace an existing 85mm centre locks, where the centres cannot be changed, even if they are not Accado branded.

    Sold in Turkey with 25mm, 28mm and 35mm backsets, this lock was fitted to PVCu doors in the UK with a 35mm backset and 16mm faceplate. The rollers are positioned at 308mm and 824mm above the spindle and 300mm and 806mm below the spindle.

    Unfortunately, handles are harder to source, so if the handles are damaged on your door, we would recommend swapping the lock for a 92mm PZ version, repositioning the roller keeps and fitting new handles.

    Accado gearboxes are distinctive because of their 85mm centre measurement. Newer versions have the top corner of the gearbox cut out with a groove for handle fixings, whereas older versions feature a curved top. Also, the older versions are no longer available but they can be interchanged with the new gearbox.

    Certain versions of this gearbox also feature a black plastic cover on one side (with metal on the other side).

    Accado Style gearboxes measure 225mm high by 51mm wide. They were only available with a 35mm backset when fitted to doors sold by B&Q. The deadbolt is 31mm high, projecting out 13mm when thrown, and the latch is 25mm high.

    These gearboxes are only available with lift lever functionality.

    Accado Style locks feature traditional, round rollers with minimal adjustability.

  • ACT Access Keypad with built in Proximity Reader

    ACT Access Keypad with built in Proximity Reader

    0 out of 5

    The ACT5e PROX digital keypad is a simple to use and easy to install standalone access control product for a single door. The unit combines a keypad with a proximity card reader system for up to 50 individual user codes and 50 cards or fobs. Keypad backlighting enhances functionality at night or in poor light conditions. Keypad is contained in a stylish polycarbonate housing, with stainless steel keys and potted electronics, allowing for indoor and outdoor installation. The ACT 5e PROX may be surface or flush mounted on to a standard single gang electrical back box. Supplied boxed.

  • ACT10 Electronic Stand Alone Keypad

    ACT10 Electronic Stand Alone Keypad

    0 out of 5

    The ACT 10 digital keypad is a sturdy and durable unit providing an access control solution for up to 2 doors. Made from vandal resistant die cast zinc with backlit stainless steel keys. It facilitates access control on standalone doors and is suited to both the inside or the outside a building.

    The ACT 10 is a multi-purpose keypad that caters for access control, door monitoring and interlock applications.

    Supplied boxed.

  • Adams Rite 7100 Single Door Electric Release

    Adams Rite 7100 Single Door Electric Release

    0 out of 5

    The 7100 series has a flat SAA faceplate for use with single doors and is available in 12v, unmonitored, and fail safe or fail secure versions, as well as versions for AC supply. Fail secure and fail safe operation can also be reversed once on site. The supplied sub cover will suit a 44mm thick door that closes flush with the jamb edge. See the associated parts for extended sub covers. Compatible with aluminium, steel and timber frames.

    Often used in conjunction with Aluminium door deadlatch cases such as the Adams Rite 4710 series lock cases.

    *Please note, due to its nature this item is sealed with a tamper-evident security seal. Please confirm the item matches the description on the invoice, and is needed, before breaking this seal. Once this seal has been broken, or the item has been removed from its packaging, it is considered to be ‘used’ cannot be returned unless it becomes faulty. Returns for faulty items will be handled in accordance with the relevant manufacturers’ returns procedures.

  • Adams Rite 7400 Ultraline Electric Release

    Adams Rite 7400 Ultraline Electric Release

    0 out of 5

    The 7400 Ultraline range suits single doors and can operate under 15kg of side-load pressure. It can be retrofitted to previous Adams Rite strikes, and operates at 12 or 24v AC or DC. Often used to help satisfy the requirements of Doc M, the release requires half the force to open than the 7100 series release. The innovative and compact robust stainless steel split-jaw design maintains the high level of security expected from Adams Rite while enabling release electrically with over 15kg of sideload pressure.

    This is the flat faceplate version designed for use on single doors. For the curved faceplate version for double doors, see sku 7401130

  • Adams Rite Armlock 1354 Mini Shear Magnet

    Adams Rite Armlock 1354 Mini Shear Magnet

    0 out of 5

    High quality Adams Rite mini shear Magnets, used in applications where the armature is required to pass over the face of the Magnet. Compatible with timber, steel, aluminium and glass frames, suitable for Internal use.

    • Current Consumption: Pull in 1500mAat 12V DC 1500mA at 24V DC, Holding 500mA at 12V DC 400mA at 24V DC.
    • Dimensions: Mortice: (H) 164mm x (W) 30mm x (D) 25mm, Surface: (H) 200mm x (W) 38mm x (D) 38mm.
    • Holding Force: 1500KG, 5 Star strength grade.

    *Please note, due to its nature this item is sealed with a tamper evident security seal. Please confirm the item matches the description on the invoice, and is needed, before breaking this seal. Once this seal has been broken, or the item has been removed from its packaging, it is considered to be used and cannot be returned unless it becomes faulty. Returns for faulty items will be handled in accordance with the relevant manufacturers returns procedures.

  • Alpro AL110 ANSI Electric Release 12v/24v DC- Long 200mm Faceplate

    Alpro AL110 ANSI Electric Release 12v/24v DC- Long 200mm Faceplate

    0 out of 5

    This Alpro ANSI style release features a long faceplate and is suitable for use on timber doors. Often used in conjunction with mortice latches, the item features a 200mm long stainless steel faceplate, selectable 12v or 24v operation (when wiring) and is field reversible between fail-safe and fail-secure modes. An additional RM1 rectifier module can be purchased separately which allows the release to be run on AC power if required. Speak to our technical team for further information.

  • Alpro AL110 ANSI Electric Release 12v/24v DC- Standard 124mm Faceplate

    Alpro AL110 ANSI Electric Release 12v/24v DC- Standard 124mm Faceplate

    0 out of 5

    This Alpro ANSI style release is suitable for use on metal and timber doors. Often used in conjunction with latches, including narrow style dead latch mortice locks found on aluminium doors.

    The item features a 124mm long stainless steel faceplate, selectable 12v or 24v operation (when wiring) and is field reversible between fail-safe and fail-secure modes.

    An additional RM1 rectifier module can be purchased separately which allows the release to be run on AC power if required. Speak to our technical team for further information.

  • Alpro AL110 Electric Release

    Alpro AL110 Electric Release

    0 out of 5

    Black, 15mm Suits TS10A, TS10B, TS12A, TS12B TSS

  • Alpro AL150 Rim Electric Release 12v/24v DC - For Inward Opening Timber Doors

    Alpro AL150 Rim Electric Release 12v/24v DC – For Inward Opening Timber Doors

    0 out of 5

    This ALPRO rim release is designed for use with rim nightlatches on inward opening timber doors. It can be used on either 12v or 24v DC supply by following the correct wiring instructions for the application. It is easily field reversible between fail-safe and fail-secure operation. The ANSI style release has a high holding force and is built to a high standard for higher traffic and commercial applications. The additional RM1 rectifier (available separately) allows the release to be run on AC power if required, which is convenient if being used with some AC door entry systems.

    *Please note the latch bolt on most British Standard nightlatches is too large to be accommodated by the Alpro Rim Release and it is therefore not suitable for use with them.

  • Alpro AL2000 High Security Electric Release

    Alpro AL2000 High Security Electric Release

    0 out of 5

    The AL2000 is a high security electric release which features monitoring, selectable 12v or 24v (when wiring) and field reversible fail safe/fail secure operation. The additional RM1 rectifier allows the release to be run on AC power where required. Compatible with Aluminium, Steel and Timber frames.

    • Type: Mortice.
    • Style: ANSI.
    • Jaw: None Adjustable.
    • Dimensions: (H) 175mm x (W) 44.5mm x (D) 26mm.
    • Field Reversible: Fail safe / fail secure.
    • Current Consumption: 220mA at 12V DC, 110mA at 24V DC.
    • Holding Force: 1380kg.
    • Latch Accommodation: 13mm (incl. 3mm air gap).
  • Alpro Backlit Weatherproof Touch Braille Access Keypad

    Alpro Backlit Weatherproof Touch Braille Access Keypad

    0 out of 5

    The ultimate solution for high traffic access control, Single door and stand alone applications. Alpro fully sealed polycarbonate Waterproof keypads are simple to install and user friendly. These keypads feature a Braille facility. Aesthetically designed and vandal resistant, these keypads are suitable for up to 200 users. Slim and secure with no moving parts they are manufactured to highest standards for external or internal use with IP68 protection.

    Measurements:

    • Input Power: 12V AC or 12V-24V DC.
    • Dimensions: (H) 80mm x (W) 112.8mm x (D) 28mm.
    • System Type: Offline.
    • Visual Interface: Yes LED.
    • Programming Method: Via Keypad.
    • No of User Codes: 200.
    • Power consumption 120mA Max.
    • Finish: Black.
  • Alpro DB25 Solenoid Bolt

    Alpro DB25 Solenoid Bolt

    0 out of 5

    The DB25 offers a Slimline design and features power reduction allowing for continuous operation without heat generation. Also features automatic voltage regulation and dual monitoring.

    • Field Reversible: See table.
    • Dimensions: (H) 210mm x 25mm (W) x 42mm.
    • Current Consumption: 12v: 1100mA (activate) 210mA (holding), 24v: 1000mA (activate) 90mA (holding)
    • Bolt Throw: 16mm.
    • Faceplate: Radius.
    • Holding Force: 1000kg.
  • Alpro EB1001 Electric Solenoid Bolt

    Alpro EB1001 Electric Solenoid Bolt

    0 out of 5

    The EB1001 suits all door types and can be fitted in the door or the frame. It also features a plug in LED indicator as standard.

    • Field Reversible: Fail safe.
    • Dimensions: (H) 203mm x (W) 34mm x 37mm.
    • Current Consumption: 1000mA (activating), 259mA (holding).
    • Bolt Throw: 15mm.
    • Faceplate: Square.
    • Holding Force:
  • Alpro EB250 Solenoid Bolt

    Alpro EB250 Solenoid Bolt

    0 out of 5

    The EB250 is a Slimline lock ideally suited to narrow style aluminium doors. It suits sliding, double or Single swing doors and can be fitted to the door or the frame. Compatible with timber and metal doors

    • Field Reversible:
    • Current Consumption: 12v: 740mA (activate) 120mA (holding), 24v: 440mA (activate) 70mA (holding).
    • Dimensions ALPEB250: (H) 210mm (W) 25mm (D) 43mm.
    • Dimensions ALPEB250KO: (H) 230mm (W) 25mm (D) 43mm.
    • Bolt Throw: 14mm.
    • Faceplate:
  • Alpro EB501 Solenoid Bolt

    Alpro EB501 Solenoid Bolt

    0 out of 5

    The Alpro EB501 electric mini bolt allows for remote access and exit control of most timber and metal doors. Suitable for sliding or swing, single and double action operations. It can be fitted in the frame or in the door and is also suitable for narrow profile joinery cabinets and showcases.

    • 3 year guarantee
    • Auto re-lock function
    • Field Reversible: Fail safe.
    • Dimensions: (H) 150mm x (W) 22mm x (D) 30mm.
    • Current Consumption: 700mA (activate) 100mA (holding)
    • Bolt Throw: 13mm.
    • Faceplate: Square.
    • Holding Force: 100mA
  • Alpro EL900 ANSI Electric Release

    Alpro EL900 ANSI Electric Release

    0 out of 5

    The EL900 is supplied with both long (200mm separate) and short faceplates (124mm fitted) and a 25mm extension lip and while available in both fail safe and fail secure. These releases can be easily converted on site. Simply select the voltage required and whether monitoring is required or not. Compatible with Aluminium and Timber frames.

    • Type: Mortice.
    • Style: ANSI.
    • Jaw: None adjustable
    • Jaw Dimensions:
    • Dimensions: (H) 124mm x (W) 42mm x (D) 31mm.
    • Field Reversible: Fail safe monitored.
    • Current Consumption: 300mA at 12v DC, 150mA at 24v DC.
    • Holding Force: 1380kg.
    • Latch Accommodation: 13mm (inc. 3mm air gap).
  • Alpro EMS1200 Mini Shear Magnet

    Alpro EMS1200 Mini Shear Magnet

    0 out of 5

    High quality Alpro mini shear Magnets, used in applications where the armature is required to pass over the face of the Magnet. Compatible with timber, steel, aluminium and glass frames (depends on selected model). Suitable for Internal use.

    • Current Consumption: Pull in 1150mA at 12V DC 1550mA at 24V DC, Holding 290mA at 12V DC 160mA at 24V DC.
    • Dimensions: (H) 163mm x (W) 30mm x (D) 35mm.
    • Holding Force: 1200KG, 5 Star strength grade C.
  • Alpro EMS1200S Glass Bracket Only

    Alpro EMS1200S Glass Bracket Only

    0 out of 5

    This Alpro glass door bracket only is to suit Alpro EMS1200S magnets.

  • Alpro Weatherproof Narrow Touch Access Keypad

    Alpro Weatherproof Narrow Touch Access Keypad

    0 out of 5

    This narrow style waterproof keypad from Alpro is simple to install and user friendly. The aesthetically designed and vandal resistant unit is suitable for up to 200 users. Slim and secure with no moving parts they are manufactured to a high standard and suitable for external or internal use. Features solid state piezo technology with no moving keys, slimline design, visual and audio feedback, as well as timeout functions for code entry. Non-volatile memory CE and UL approved. Long life wear resistant unit. Comes with 3 metre long connection cable fitted and full installation instructions.

End of content

End of content